展开
首页   邮箱   联系我们   ENGLISH
热点电话: 0755-23490731
点击这里给我发消息  点击这里给我发消息  
     首页        关于我们        新闻动态        产品中心        回收租赁        在线反馈        联系我们
--光纤切割刀 剥线钳--Photon Kinetics FK12 角度超声波光纤切割刀
便携式扫描仪
光纤熔接机
迪威普(DVP)
古河(Furukawa)
藤仓(Fujikura)
住友(Sumitomo)
光纤熔接机电极
电池 适配器
光纤熔接机附件
光纤切割刀 剥线钳
光时域反射仪(OTDR)
安捷伦(Agilent) OTDR
安立(Anristu) OTDR
EXFO OTDR
JDSU/安科特纳 OTDR
罗意斯(Noyes) OTDR
横河/ANDO OTDR
中国 OTDR
LCD & Touch Screen
光纤工具
光纤端面检测器
光纤识别器
可视故障定位仪
光学测试仪表
光源
光功率计 光探头
多波长计
光衰减器
数字通信分析仪
UV点光源固化系统
UV光源
UV灯泡
光导管
光学调整架
首页 光纤熔接机 >> 光纤切割刀 剥线钳 >> Photon Kinetics FK12 角度超声波光纤切割刀
光纤工具
Photon Kinetics FK12 角度超声波光纤切割刀
品牌:
  Photon Kinetics / YORK
型号:
  FK12
保修:
  对于保修的详细信息联系我们
价格:
  ¥.00
数量:
简介:

   功能
Photon Kinetics FK12 Precision Angled Fiber Cleaver
No other cleavers in the world provide better, faster or easier results!
The FK12 Angled Fiber Cleaver set the standard for low reflectance fiber termination of better than -60 dB. Fast and repeatable cleaving of fiber ends at user-selectable cleave angles (0º to 15º) make it possible for installers to reduce the reflectance of mechanical splices and other fiber terminations without the use of index matching gels. The FK12 is the tool of choice where quick fiber termination and low return loss are required at minimum cost.

Features and Benefits:
• Tension First — eliminates the need for polishing and index matching gels
• Versatile — cleaves a wide range of fiber types and sizes
• Low reflectance terminations — enables optimal performance of fiber optic components and systems
• Clean — no contamination of the fiber during cleaving
• Easy-to-use — fast terminations reduce installation or pigtailing costs
The fiber is secured in the clamps and put under controlled tension. If using the FK12 the torsion required to achieve the desired cleave angle is set. Tension is then applied and the ultrasonic vibrating diamond blade is moved toward the fiber. The result, depending on the cleaver used, is a clean, flat or angled fiber that is ready for splicing or testing.
   详细介绍
Specifications
 
Model
FK12
Fibers cleaved
125 μm
Maximum fiber buffer
250 μm diameter
Minimum cleave length
6 mm (.23 inches)
Cleave angle settings
0º to 15º
Cleave angle repeatability
<1º typical (2  repeatability at 8º setting)
Blade
Diamond, estimated life >20,000 cleaves
 
 

General Specifications
 
Case
ABS, non-slip feet, 6.25 mm (.24 inch) BSW thread tripod mount
Battery
9V alkaline (MN1604), estimated battery life >10,000 cleaves
Weight
1.1 kg (2.4 lbs)
Dimensions (H x W x D)
75 x 153 x 150 mm (3.0 x 6.0 x 5.9 inches)
Operating temperature
0º to 45º C (32º to 113º F)
Storage temperature
-20º to 60º C (-4º to 140º F)
首页      关于我们      新闻动态      产品展示      回收租赁      在线反馈      联系我们     
版权所有 © 2006-2011 Optics Test Equipment      点击这里给我发消息  点击这里给我发消息